# 브러시 DC 모터 시장 > Brushed DC Motor Market Research Report By Voltage (Less Than 75 kV, Between 75 kV - 375 kV, Higher Than 375 kV), By Application (Residential, Commercial, Industrial, Automotive) - Forecast to 2035 - **Forecast Period:** 2026-2035 - **CAGR:** 3.37% - **2025:** USD 8.2 Billion - **2035:** USD 11.42 Billion - **Key Players:** Johnson Electric, Nidec Corporation, Mabuchi Motor, Robert Bosch GmbH, Denso Corporation, Mitsuba Corporation, ABB Ltd., Allient Inc. **Report ID:** MRFR/EnP/33265-HCR · **Pages:** 128 · **Author:** Priya Nagrale · **Last Updated:** October 17, 2026 **URL:** https://www.marketresearchfuture.com/reports/brushed-dc-motor-market-35137 --- ## Market Summary ## Brushed DC Motor Market Summary The Brushed DC Motor Market was valued at USD 19.40 billion in 2025. It is projected to reach USD 20.44 billion in 2026 and USD 32.67 billion by 2035, a CAGR of 5.35% over 2026–2035. Two catalysts anchor that trajectory. Global electric car sales passed 17 million units in 2024 [1], and every one of those vehicles carries dozens of small actuators. India's Production Linked Incentive scheme for automobiles and auto components, with an outlay of ₹25,938 crore (about USD 3.1 billion) [7], is pulling component manufacturing, including motors, into new production clusters. Technology inside the product category is changing quickly, even though the basic architecture is more than a century old. Older wound-field and heavy iron-core designs are giving way to compact permanent-magnet units built with high-grade ferrite, precious-metal or copper-graphite brushes, integrated gearheads, and onboard noise suppression. Suppliers are also re-engineering motor commutation systems to extend brush life and meet automotive emission limits. Policy is accelerating the shift. China's Motor Energy Efficiency Improvement Plan targeted 170 million kW of high-efficiency motor output by 2023 [6], and that target raised the performance bar across the region's supplier base. Asia-Pacific anchors the Brushed DC Motor Market with a 44.8% share in 2025, and it is also the fastest-growing region, supported by vehicle, appliance, and tool production in China, India, and ASEAN. North America ranks second at USD 4.38 billion, driven by automotive body electronics and cordless tools. Over the next decade, growth will favor suppliers that can combine low unit cost with longer service life and rare-earth-free designs. ## Key Report Takeaways ### • By Voltage - The Less Than 75 kV band holds 91.4% of Brushed DC Motor Market revenue in 2025, covering virtually all automotive, appliance, and tool units - Higher Than 375 kV is the fastest-expanding voltage band, at a 6.4% CAGR through 2035 ### • By Application - Industrial is the largest application, with a 29.6% share in 2025 - Automotive grows fastest in the Brushed DC Motor Market, at a 6.3% CAGR, as body and thermal actuators multiply per vehicle - Commercial applications generated USD 3.12 B in 2025 ### • By Region - Asia-Pacific leads with a 44.8% share - North America contributes USD 4.38 B - Europe accounts for a 21.4% share ## Market Size and Forecast (2021–2035) Market Research Future sizes the Brushed DC Motor Market bottom-up and top-down. The bottom-up estimate starts from unit shipments across automotive, appliance, tool, and industrial end uses, multiplied by average selling prices by voltage band. The top-down estimate is built from segment revenues in listed supplier filings [12–16], vehicle production data [3], and trade statistics. The two approaches are then triangulated against interviews with procurement managers and distributors. ## Market Drivers ### Growth in Consumer Electronics ### Industrial Automation and Robotics ### Rising Demand in Automotive Sector The Brushed DC Motor Market is experiencing a notable surge in demand, particularly within the automotive sector. As electric vehicles gain traction, the need for efficient and reliable motors becomes paramount. In 2025, the [automotive industry](https://www.marketresearchfuture.com/reports/automotive-industry-7683) is projected to account for a significant share of the brushed DC motor market, driven by the increasing adoption of electric and hybrid vehicles. This shift is likely to enhance the performance and efficiency of vehicles, thereby propelling the growth of the brushed DC motor market. Furthermore, advancements in automotive technology, such as regenerative braking systems, are expected to further stimulate demand for brushed DC motors, as they play a crucial role in energy recovery and overall vehicle efficiency. ### Emerging Applications in Renewable Energy ### Technological Innovations and Enhancements ## Restraints ## Restraints Impact Analysis The restraint weightings below indicate the directional drag each factor places on the Brushed DC Motor Market forecast. They are analyst assessments of relative influence and are not additive with each other or with the driver weightings above. | Restraint | ~% Impact on CAGR | Geographic Relevance | Impact Timeline | Ref | | --- | --- | --- | --- | --- | | Substitution by brushless DC motors | −1.1% | Global | Long-term (≥4 yr) | [2] | | Copper and raw-material price volatility | −0.6% | Global | Short-term (≤2 yr) | [9] | | Brush wear and limited service life | −0.5% | Global | Medium-term (2–4 yr) | [21] | | Tightening motor efficiency regulation | −0.4% | Europe, North America | Long-term (≥4 yr) | [4][5] | | Tariffs and trade fragmentation | −0.3% | North America, China | Short-term (≤2 yr) | [8] | ### Substitution by Brushless DC Motors Comparable brushed motors typically have an efficiency of 75–80%, while brushless motors typically achieve 85–90%. The price difference between the two is getting smaller due to declining driver IC costs. Since electric motor systems account for almost 45% of the world's electricity consumption [2], brushless designs are becoming more and more popular in continuous-duty applications like fans and pumps. The first to migrate are high-end appliances and tools. ### Copper and Raw-Material Price Volatility According to Market Research Future, copper windings and commutators account for 15% to 25% of the total cost of materials. In May 2024, LME copper prices reached a record of more than $11,000 a ton [9]. Due to their narrow profit margins, small-motor suppliers find it difficult to swiftly navigate such increases, particularly in the context of yearly auto price-down agreements [20]. ### Brush Wear and Limited Service Life Mechanical brushes wear with every rotation. Typical brush life ranges from about 1,000 to 3,000 operating hours, against 10,000 hours or more for brushless alternatives. Brush sparking also generates electromagnetic noise and carbon dust, which restricts use in cleanrooms, sealed [medical devices](https://www.marketresearchfuture.com/reports/medical-devices-market-2869), and long-life industrial equipment [21], and adds filter components to automotive designs. ### Tightening Motor Efficiency Regulation The EU Ecodesign Regulation 2019/1781 set a July 2023 tier requiring IE2 efficiency for small three-phase motors from 0.12 kW [4]. The US DOE's updated electric motor standards carry compliance from June 2027 [5]. Although these rules target AC machines, they shape procurement specifications and push buyers toward efficiency classes defined under IEC 60034-30-1 [21]. ### Tariffs and Trade Fragmentation The USTR's 2024 Section 301 review raised duties on a range of Chinese industrial goods [8]. China remains the dominant source of [small motors](https://www.marketresearchfuture.com/reports/small-motors-market-23605), so tariffs raise landed costs for US appliance and tool assemblers. Dual-sourcing programs add qualification expense and temporarily reduce supplier margins during transition periods. ## Opportunities ## Brushed DC Motor Market Opportunities ### Rare-Earth-Free High-Power-Density Designs China's April 2025 export controls on seven medium and heavy rare earths [25], and scheduled US tariffs on permanent magnets rising to 25% in 2026 [8], have raised risk for magnet-intensive brushless designs. Ferrite-based brushed motors avoid these supply chains entirely. Suppliers that push ferrite power density higher through better magnetic circuits and cooling can win sockets that previously went to rare-earth brushless units. ### Emerging-Market Vehicles and Appliances India, ASEAN, and parts of Africa are adding first-time car, two-wheeler, and appliance buyers. These buyers prioritize low purchase price over long service life, a profile that suits brushed motors well. Localized assembly under India's PLI scheme [7] reduces import duties and logistics costs, which gives regional suppliers room to capture share from imported units across the Brushed DC Motor Market. ### Condition Monitoring and Data-Driven Service Models Embedding current and temperature sensing in brushed gearmotors allows remaining brush life to be predicted from electrical signatures. Fleet operators of automated guided vehicles, vending machines, and medical pumps will pay for predictive maintenance alerts. This opens recurring service revenue and data subscription models for motor suppliers, a revenue line the industry has largely ignored. ### Aftermarket Replacement Demand The global vehicle parc of roughly 1.5 billion units [3] generates steady replacement demand for window lifters, wiper motors, and blower motors as brushes and bearings wear. Aftermarket channels carry higher margins than original-equipment contracts. Suppliers with broad catalog coverage and e-commerce distribution can grow this channel independently of new-vehicle cycles. ### Consumer and Educational Robotics Hobby robotics, educational kits, and low-cost service robots favor brushed gearmotors for simple control and low price. The IFR reports continued growth in professional service robots [19], and many entry-level platforms use brushed drives for wheels and grippers. Standardized motor-and-encoder modules sold through distributors offer a scalable, high-mix growth path. ## Future Outlook 브러시 DC 모터 시장은 2025년부터 2035년까지 3.37%의 CAGR로 성장할 것으로 예상되며, 자동화, 재생 에너지 응용 프로그램의 발전 및 자동차 부문에서의 수요 증가에 의해 주도됩니다. **New opportunities:** - 전기차를 위한 에너지 효율적인 브러시 DC 모터 개발. 2035년까지 브러시 DC 모터 시장은 강력한 성장과 시장 침투 증가를 달성할 것으로 예상됩니다. ## Segment Insights The Brushed DC Motor Market has diverse application segments, with the Automotive sector holding the largest share. Automotive applications, including electric steering, power windows, and HVAC systems, are significant contributors to the market's overall performance. Following closely, the Consumer Electronics sector is emerging as a fast-growing segment where brushed DC motors are utilized in devices like [power tools](https://www.marketresearchfuture.com/reports/power-tools-market-3571), kitchen appliances, and personal care products, showcasing the versatility and importance of this technology in everyday life. Growth in the Brushed DC Motor Market is primarily driven by the increasing demand for automation in various sectors. The Automotive industry is transitioning towards electric and [hybrid vehicles](https://www.marketresearchfuture.com/reports/hybrid-vehicle-market-6025), boosting demand for advanced motor technologies. Meanwhile, consumer electronics are witnessing rapid innovations, with a growing focus on portability and efficiency, fueling the demand for compact and lightweight brushed DC motors in this segment, consequently enhancing their market presence. The Automotive segment remains the dominant application in the Brushed DC Motor Market, largely due to the increasing integration of [electric motors](https://www.marketresearchfuture.com/reports/electric-motors-market-2376) in vehicles for enhanced efficiency and performance. These motors are crucial for systems like power steering and braking, where reliable and efficient performance is paramount. On the other hand, the Medical Devices segment is an emerging contender, utilizing brushed DC motors in portable equipment like surgical tools and mobility devices. As the healthcare sector propels technological advancement, the demand for precise, efficient motors in medical applications is anticipated to grow, showcasing the niche yet vital role these motors play in medical technology. ## Regional Market Share Analysis ### North America : Innovation and Demand Surge North America is witnessing significant growth in the brushed DC motor market, driven by advancements in automation and robotics. The region holds approximately 40% of the global market share, making it the largest market. The increasing demand for electric vehicles and [renewable energy](https://www.marketresearchfuture.com/reports/renewable-energy-market-1515) solutions is further propelling this growth. Regulatory support for energy-efficient technologies is also a key catalyst for market expansion. The United States and Canada are the leading countries in this region, with major players like Baldor Electric Company and Ametek, Inc. dominating the landscape. The competitive environment is characterized by continuous innovation and strategic partnerships among key manufacturers. The presence of established companies ensures a robust supply chain and enhances market accessibility, contributing to the overall growth of the sector. ### Europe : Regulatory Support and Innovation Europe is emerging as a significant player in the brushed DC motor market, driven by stringent regulations promoting energy efficiency and sustainability. The region accounts for approximately 30% of the global market share, making it the second-largest market. The European Union's commitment to reducing carbon emissions and enhancing energy efficiency is a major driver for the adoption of brushed DC motors in various applications. Germany, France, and the United Kingdom are the leading countries in this market, with key players like Faulhaber Group and Crouzet leading the charge. The competitive landscape is marked by innovation and technological advancements, with companies focusing on developing high-performance motors. The presence of a strong manufacturing base and a skilled workforce further enhances the region's market potential. ### Asia-Pacific : Emerging Markets and Growth Potential Asia-Pacific is rapidly becoming a powerhouse in the brushed DC motor market, fueled by industrialization and urbanization. The region holds approximately 25% of the global market share, with countries like China and Japan leading the charge. The increasing demand for [consumer electronics](https://www.marketresearchfuture.com/reports/consumer-electronics-market-66318) and automotive applications is driving market growth, supported by favorable government policies promoting manufacturing and innovation. China is the largest market in the region, with significant contributions from companies like Nidec Corporation and Mabuchi Motor Co., Ltd. The competitive landscape is characterized by a mix of local and international players, fostering innovation and cost-effective solutions. The presence of a robust supply chain and increasing investments in research and development further enhance the region's market dynamics, positioning it for sustained growth. ### Middle East and Africa : Resource-Rich and Emerging Markets The Middle East and Africa (MEA) region is witnessing gradual growth in the brushed DC motor market, driven by increasing industrialization and infrastructure development. The region holds approximately 5% of the global market share, with significant potential for expansion. The demand for energy-efficient solutions in various sectors, including oil and gas, is a key driver for market growth, supported by government initiatives to diversify economies. Countries like South Africa and the UAE are emerging as key players in this market, with local manufacturers and international companies exploring opportunities. The competitive landscape is evolving, with a focus on innovation and sustainability. The presence of key players and investments in infrastructure development are expected to enhance market dynamics, paving the way for future growth in the region. ## Competitive Benchmarking The Brushed DC Motor Market is currently characterized by a dynamic competitive landscape, driven by technological advancements and increasing demand across various sectors, including automotive, [industrial automation](https://www.marketresearchfuture.com/reports/industrial-automation-market-2212), and consumer electronics. Key players such as Maxon Motor AG (CH), Nidec Corporation (JP), and Johnson Electric Holdings Limited (HK) are strategically positioned to leverage innovation and regional expansion to enhance their market presence. Maxon Motor AG (CH) focuses on high-precision applications, while Nidec Corporation (JP) emphasizes a broad product portfolio and global reach. Johnson Electric Holdings Limited (HK) is known for its strong emphasis on R&D, which allows it to maintain a competitive edge through continuous product improvement and diversification. Collectively, these strategies contribute to a moderately fragmented market structure, where competition is increasingly defined by technological capabilities and customer-centric solutions.In terms of business tactics, companies are increasingly localizing manufacturing to reduce lead times and enhance supply chain efficiency. This approach not only mitigates risks associated with The Brushed DC Motor Market demands. The competitive structure of the Brushed DC Motor Market appears to be moderately fragmented, with several key players exerting influence through innovation and strategic partnerships, thereby shaping the overall market dynamics. In August Nidec Corporation (JP) announced the opening of a new manufacturing facility in Vietnam, aimed at increasing production capacity for its brushed DC motors. This strategic move is likely to enhance Nidec's ability to meet the growing demand in Southeast Asia, while also optimizing its supply chain operations. The establishment of this facility underscores Nidec's commitment to regional expansion and its focus on maintaining a competitive edge through localized production. In September Johnson Electric Holdings Limited (HK) launched a new line of energy-efficient brushed DC motors designed for automotive applications. This product introduction is significant as it aligns with the industry's shift towards sustainability and energy efficiency, potentially positioning Johnson Electric as a leader in eco-friendly motor solutions. The emphasis on energy efficiency not only meets regulatory demands but also appeals to environmentally conscious consumers, thereby enhancing the company's market appeal. In July Maxon Motor AG (CH) entered into a strategic partnership with a leading robotics firm to develop advanced motion control systems utilizing their brushed DC motors. This collaboration is indicative of a broader trend towards integrating [advanced technologies](https://www.marketresearchfuture.com/reports/advanced-technologies-market-41462) such as AI and automation into traditional motor applications. By aligning with a robotics leader, Maxon is likely to enhance its product offerings and tap into new market segments, thereby reinforcing its competitive position. As of October the Brushed DC Motor Market is witnessing trends that emphasize digitalization, sustainability, and the integration of AI technologies. Strategic alliances are increasingly shaping the competitive landscape, allowing companies to pool resources and expertise to drive innovation. The shift from price-based competition to a focus on technological differentiation and supply chain reliability is becoming more pronounced. Moving forward, companies that prioritize innovation and adaptability are likely to emerge as leaders in this evolving market. ## Recent News & Developments Recent developments in the Brushed DC Motor Market indicate significant growth potential influenced by technological advancements and increased automation across various industries. Companies such as Maxon Motor and Nidec Corporation are innovating to enhance efficiency, tapping into emerging applications in robotics and [electric vehicles](https://www.marketresearchfuture.com/reports/electric-vehicles-market-1793). Baldor Electric Company and Ametek are also focusing on optimizing performance and reducing energy consumption, aligning with global sustainability trends. Current affairs reveal a rising demand for customized solutions, prompting firms like Panasonic Corporation and Johnson Electric to expand their product offerings. In terms of mergers and acquisitions, there have been notable activities with companies like CUI Inc. looking to bolster their market position, although specific details on recent M&A transactions involving the primary players remain sparse. The growth in market valuation for firms engaged in manufacturing brushed DC motors demonstrates robust investment interest, suggesting a positive outlook for the sector as it adapts to evolving technological requirements and consumer expectations. This dynamic environment is expected to foster collaborations and strategic partnerships among major industry players, further accelerating market expansion. ## Report Scope | Parameter | Details | | --- | --- | | Market Scope | Brushed DC Motor Market revenue segmented by Voltage (Less Than 75 kV, Between 75 kV - 375 kV, Higher Than 375 kV), Application (Residential, Commercial, Industrial, Automotive), and Geography (North America, Europe, Asia-Pacific, South America, Middle-East and Africa) | | Study Period | 2021–2035 (Historical 2021–2024; Base Year 2025; Forecast 2026–2035) | | CAGR | 5.35% (2026–2035) | | Market Size checkpoints | USD 19.40 B (2025); USD 20.44 B (2026); USD 25.18 B (2030); USD 32.67 B (2035) | | Fastest Growing Segments | Higher Than 375 kV (6.4% CAGR); Automotive (6.3% CAGR) | | Companies Profiled | Johnson Electric, Nidec Corporation, Mabuchi Motor, Robert Bosch GmbH, Denso Corporation, Mitsuba Corporation, ABB Ltd., Allient Inc., Maxon Group, Bühler Motor | | Valuation Currency | USD Billion, current prices | ## Frequently Asked Questions **Q: 브러시 DC 모터 시장의 예상 시장 가치는 2035년까지 얼마입니까?** A: 브러시 DC 모터 시장은 2035년까지 114억 2천만 달러의 가치를 가질 것으로 예상됩니다. **Q: 2024년 브러시 DC 모터 시장의 시장 가치는 얼마였습니까?** A: 2024년 브러시 DC 모터 시장은 79억 3천 1백만 달러로 평가되었습니다. **Q: 2025년에서 2035년까지의 예측 기간 동안 브러시 DC 모터 시장의 예상 CAGR은 얼마입니까?** A: 2025년에서 2035년까지의 예측 기간 동안 브러시 DC 모터 시장의 예상 CAGR은 3.37%입니다. **Q: 브러시 DC 모터 시장에서 가장 높은 성장을 보일 것으로 예상되는 응용 분야는 무엇입니까?** A: 자동차 응용 분야는 2024년 25억 달러에서 2035년 35억 달러로 성장할 것으로 예상됩니다. **Q: 2035년까지 산업 장비 부문의 예상 가치는 얼마입니까?** A: 산업 장비 부문은 2024년 18억 달러에서 2035년 25억 달러로 증가할 것으로 예상됩니다. **Q: 브러시 DC 모터 시장에서 소형, 중형 및 대형 모터의 가치는 어떻게 비교됩니까?** A: 2035년까지 소형 모터는 22억 달러, 중형 모터는 45억 달러, 대형 모터는 47억 2천만 달러로 성장할 것으로 예상됩니다. **Q: 2035년까지 가장 높은 가치를 가질 것으로 예상되는 전압 부문은 무엇입니까?** A: 중전압 부문은 2035년까지 50억 달러에 이를 것으로 예상됩니다. **Q: 2035년까지 브러시 DC 모터 시장을 지배할 것으로 예상되는 최종 사용 부문은 무엇입니까?** A: 산업 최종 사용 부문은 2024년 39억 3천 1백만 달러에서 2035년 54억 2천만 달러로 증가할 것으로 예상됩니다. **Q: 브러시 DC 모터 시장의 주요 플레이어는 누구입니까?** A: 브러시 DC 모터 시장의 주요 플레이어로는 Maxon Motor AG, Nidec Corporation, Johnson Electric Holdings Limited가 있습니다. **Q: 브러시 DC 모터 시장의 성장에 영향을 미치는 트렌드는 무엇입니까?** A: 자동차 및 산업 응용 분야에서의 수요 증가와 같은 트렌드가 브러시 DC 모터 시장의 성장에 영향을 미치고 있습니다. --- *This Markdown endpoint is provided for AI systems and LLM crawlers. For the full interactive report visit https://www.marketresearchfuture.com/reports/brushed-dc-motor-market-35137*